The Auto One Pump provides a cost effective Automatic Dynamic Mattress System, that offers Automatic Pressure Setting where the system sets the pressure to an optimum setting based upon the patient’s weight.
Alternatively, the system can be manually set to the desired pressure setting - the ‘Automatic Pressure Setting’ can also be manually adjusted +/- to suit the individual.
The Auto One is developed for use in hospital, residential and home care environments, the Auto One mattress system is fully EN60601-1, EN60601-1-2 and EN60601-1-11 compliant.
• Offering a choice of therapy modes;
• Alternating Mode – providing pressure redistribution over a 10/15/20/25 minute cycle in an AB (2 in 1) pattern.
• Static Mode – the system will maintain constant surface pressure in all cells based upon the selected pressure/comfort setting.
• Automatic Pressure Setting determines an optimal surface pressure based on the patient weight.
• Caregivers can manually adjust the pressure setting based upon their clinical assessment of the patients BMI, posture, level of risk and comfort level.
• Seat Mode – Recommended if the bed backrest is to be raised over 25°, as it provides additional pressure to the cells to help avoid bottoming out at the sacral area.
• Max Inflate Mode – Automatically inflates all cells to the maximum pressure setting. This can be beneficial when moving or repositioning a patient.
• Audible and visual alerts for low pressure, alternate failure or power failure.
• Auto lockout – the pump will lockout after 5 minutes of inactivity to prevent accidental setting changes.
• Mute button - once the audible alert has been acknowledged the alert can be muted whilst the cause is investigated.
• Accessible rear filter for ease of maintenance.
• Integral hanging hooks enable the pump to be suspended from the bed footboard, and 2 pads assist with pump stability and to minimise vibration.
• Fully EN60601-1, EN60601-1-2 and EN60601-1-11 compliant.
